(There is a-lot of information in this tab so you might have to scroll awhile to find what you are looking for.)
1. JOURNAL PUBLICATIONS (* = current or former student; **= former post doctoral advised)
Kyle Baylis*, Guanglu Zhang*, Elissa Morris*, and Daniel A. McAdams, “Methods to Design an Inclusive Product Family,” submitted to the ASME Journal of Mechanical Design Science
Maulik C. Kotecha*, Ting-Ju Chen, Daniel A. McAdams and, Vinayak Krishnamurthy “Design Ideation Through Speculative Fiction: Foundational Principles & Exploratory Study,” accepted to the ASME Journal of Mechanical Design.
Devesh Bhasin*, Daniel A. McAdams, and Astrid Layton, “A Product Architecture-Based Tool for Bioinspired Function-Sharing,” the ASME Journal of Mechanical Design, November, 2020 (online), pp. 1-33, DOI: https://doi.org/10.1115/1.4049151.
Devesh Bhasin*, Spencer T. Behmer, and Daniel A. McAdams, “Fostering Function-Sharing using Bioinspired Product Architecture,” the ASME Journal of Mechanical Design, October, 2020 (online), pp. 1-35, DOI: https://doi.org/10.1115/1.4048815.
Guanglu Zhang*, Elissa Morris*, Douglas Allaire, Daniel A. McAdams, “Research Opportunities and Challenges in Engineering System Evolution,” the ASME Journal of Mechanical Design, August, 2020, Vol. 142, No. 8, pp. 81401-1-081401-14, DOI:
10.1115/1.4045908 [Featured Article].
Guanglu Zhang*, Douglas Allaire, Venkatesh Shankar, and Daniel A. McAdams, “A Case against the Trickle-down Effect in Tech
Nasra S. Al-Maskari*, Daniel A. McAdams & J. N. Reddy, “Modeling of a Biological Material Nacre: Multi-objective Optimization Model,” Mechanics of Advanced Materials and Structures, 2019, DOI: 10.1080/15376494.2019.1568649.
Guanglu Zhang*, Douglas Allaire, Venkatesh Shankar, and Daniel A. McAdams, “System Evolution Prediction and Manipulation Using a Lotka-Volterra Ecosystem Model,” Design Studies, Vol. 60, No. C, January 2019, pp. Pages 103-138.
Guanglu Zhang*, Douglas Allaire, Daniel A. McAdams, and Venkatesh Shankar, “Generating Technology Evolution Prediction Intervals Using a Bootstrap Method,” the ASME Journal of Mechanical Design, Vol 141, No. 6, January 31, 2019, 9 pages, Paper No: MD-18-1341; doi: 10.1115/1.4041860
Devesh Bhasin*, Daniel A. McAdams, “The Characterization of Biological Organization, Abstraction, and Novelty in Biomimetic Design”, Designs, Vol. 2,No. 54, December 2018, article 4
Jonel Ortiz*, Guanglu Zhang*, and Daniel A. McAdams, “A Model for the Design of a Pomelo Peel Bioinspired Foam,” the ASME Journal of Mechanical Design, 2018; 140(11):114501. doi:10.1115/1.4040911.
Kyle Baylis*, Daniel A. McAdams nd Guanglu Zhang, “Product Family Platform Selection Using a Pareto Front of Maximum Commonality and Strategic Modularity,” Research in Engineering Design, Vol. 29, issue 4, October 2018, pp. 547-563, DOI 10.1007/s00163-018-0288-5.
Daniel A. McAdams, “Discussion of “A Review of Thickness-Accommodation Techniques in Origami-Inspired Engineering” (Lang, Robert J., Crampton, Erica B., Tolman, Kyler A., Magleby, Spencer P., Howell, Larry L.”, 2017, ASME Appl. Mech. Rev., ….), ASME Applied Mechanics Reviews. Vol. 71, January 2018, pp. 015504-1–015504-3
Nasra Al-Maskari*, Daniel A. McAdams and J. N. Reddy, “Modeling of a Biological Material Nacre: Waviness Toughness Model,” Mechanics of Advanced Materials and Structures, January 2018, DOI: 10.1080/15376494.2017.1410916
Guanglu Zhang*, Daniel A. McAdams, Venkatesh Shankar, and Milad Mohammadi Darani, “Technology Evolution Prediction Using Lotka–Volterra Equations,” the ASME Journal of Mechanical Design, 2018, Vol. 140, No. 6, pp. 061101-061101-9, doi: 10.1115/1.4039448
Guanglu Zhang*, Milad Mohammadi Darani, Venkatesh Shankar, and Daniel A. McAdams, “Modeling the Evolution of System Technology Performance when Component and System Technology Performances Interact: Commensalism and Amensalism,” Technological Forecasting & Social Change, December 2017, Vol. 125, pp. 116-124, https://doi.org/10.1016/j.techfore.2017.08.004
Nasra Al-Maskari*, Daniel A. McAdams and Junuthula Reddy, “Modeling of a Biological Material Nacre: Waviness Stiffness Model,” Materials Science and Engineering C, Volume 70, Part 1, 1 January 2017, Pages 772–776.
Sooyeon Lee*, Daniel A. McAdams, and Elissa Morris*, “Categorizing Biological Information Based on Function-Morphology for Bioinspired Conceptual Design,” Artificial Intelligence for Engineering Design, Analysis and Manufacturing, pp. 1–17. December 2016, doi: 10.1017/S0890060416000500.
Chaoqun Zhang, Daniel A. McAdams, Jaime C. Grunlan, “Nano/micro-manufacturing of Bioinspired Hybrid Materials: A Review of Methods to Mimic Natural Structures,” Advanced Materials, May 2016.
Wei Li* and Daniel A. McAdams, “Designing Optimal Origami Structures by Computational Evolutionary Embryogeny,” The ASME Journal of Computing and Information Science in Engineering, 2015, Vol. 15, No. 1, pp. 011010-1 – 011010-11.
Michael W. Glier*, Daniel A. McAdams, and Julie S. Linsey, “Exploring Automated Text Classification of to Improve Keyword Corpus Search Results for Bioinspired Design,” The ASME Journal of Mechanical Design, 2014, Vol. 136, No. 11, pp. 111103-1 – 111103-12.
Joanna Tsenn*, Olufunmilola Atilola, Daniel A. McAdams, and Julie S. Linsey, “The Effects of Time and Incubation on Design Concept Generation,” Design Studies, 2014, Vol. 35, No. 5, pp. 500-526.
Wei Li* and Daniel A. McAdams, “A Novel Method to Design and Optimize Flat-foldable Origami Structures through a Genetic Algorithm,” The ASME Journal of Computing and Information Science in Engineering, 2014, Vol. 14, No. 3, pp. 031008-1 – 031008-10.
Michael W. Glier*, Joanna Tsenn*, Julie S. Linsey, Daniel A. McAdams, “Evaluating the Directed Intuitive Approach for Bioinspired Design,” The ASME Journal of Mechanical Design, 2014, Vol. 136, No. 7, pp. 071012-1 – 071012-9.
Shraddha Sangelkar* and Daniel A. McAdams, “Mining Functional Model Graphs to Find Product Design Heuristics with Inclusive Design Illustration,” The ASME Journal of Computing and Information Science in Engineering, 2013 Vol. 13, No. 4, pp. 041008-1 – 041008-11.
Shraddha Sangelkar* and Daniel A. McAdams, “Formalizing and Exploring the Transferability of Inclusive Design Rules,” The ASME Journal of Mechanical Design, 2013, Vol. 135, No. 9, pp. 091004-1 – 091004-12.
Ryan S. Hutcheson* and Daniel A. McAdams, “Sensitivity Measures for Use During Conceptual Design,” The International Journal of Design Engineering, Vol. 5, No. 1, 2012, pp. 1-20.
Seung Ki Moon** and Daniel A. McAdams, “A Market-based Design Strategy for a Universal Product Family,” The ASME Journal of Mechanical Design, Vol. 134, No. 11, November 2012, pp. 111007-1 – 111007-11.
Jonathan Arendt*, Richard Malak, and Daniel A. McAdams, “Uncertain Technology Evolution and Decision Making in Design,” The ASME Journal of Mechanical Design, Vol. 134, No. 10, October 2012, pp. 100904-1 – 100904-11.
Shraddha Sangelkar* and Daniel A. McAdams, “Adapting ADA Architectural Design Knowledge to Product Design Using Association Rule Mining,” The ASME Journal of Mechanical Design, Vol. 134, No. 7, July 2012, pp. 071003-1 – 071033-15.
Jonathan Arendt*, Richard Malak, and Daniel A. McAdams, “Design with Uncertain Technology Evolution,” SAE Int. J. Passeng. Cars – Mech. Syst. Vol. 5, No. 1, 2012, pp. 677-687.
Ryan S. Hutcheso *, Daniel A. McAdams and Irem Y. Tumer, “Function-Based Behavioral Modeling,” The International Journal of Computer Aided Engineering and Technology, Vol. 4, No. 3, 2012, pp. 250-271.
Shraddha Sangelkar*, Nicholas Cowen*, and Daniel A. McAdams, “User Activity – Product Function Association Based Design Rules for Universal Products,” Design Studies, Vol. 33, No. 1, January 2012, pp. 85-110, [Received Design Studies Award (best paper) for 2012].
Michael W. Glier*, Susanne R. Schmidt*, Julie S. Linsey, and Daniel A. McAdams, “Distributed Ideation: Idea Generation in Distributed Capstone Engineering Design Teams,” International Journal of Engineering Education, Vol. 27, No. 6, 2011, pp. 1281–1294.
Daniel A. McAdams and Vincent Kostovich*, “A Framework and Representation for Universal Product Design,” The International Journal of Design, Vol. 5, No. 1, April 2011, pp. 29-42.
Robert L. Nagel*, Ryan S. Hutcheson*, Robert B. Stone, and Daniel A. McAdams, “Process and Event Modeling for Conceptual Design,” Journal of Engineering Design, March 2011, Vol. 22, No. 3, pp. 145–164.
Hyunmin Cheong, I. Chiu, L.H. Shu, Robert B. Stone, and Daniel A. McAdams, “Biologically Meaningful Keywords for Functional Terms of the Functional Basis,” The ASME Journal of Mechanical Design, Vol. 132, No. 2, February 2011, pp. 021007-1 – 021007-11.
Robert L. Nagel*, Kenneth Perry*, Robert B. Stone, and Daniel A. McAdams, “Function-Based Design Process for an Intelligent Ground Vehicle Vision System,” Journal of Electronic Imaging, Vol. 19, No. 4, December 2010, pp. 043024 (13 pages).
Ryan S. Hutcheson* and Daniel A. McAdams, “A Hybrid Sensitivity Analysis for Use in Early Design,” The ASME Journal of Mechanical Design, Vol. 132, No. 11, November 2010, pp. 111007-1 – 111007-10.
Jacquelyn K. S. Nagel*, Robert L. Nagel*, Robert B. Stone, and Daniel A. McAdams, “Function-Based Biology Inspired Concept Generation,” Artificial Intelligence for Engineering Design, Analysis and Manufacturing, Vol. 24, No. 4, October 2010, pp. 521-535.
Ken English, Aziz Naim, Kemper Lewis, Susanne Schmidt*, Vimal Viswanathan, Julie Linsey, Daniel A. McAdams, Bryan Bishop, Matthew I. Campbell, Kerry Poppa, Robert B. Stone, and Seth Orsborn, “Impacting Designer Creativity Through IT-Enabled Concept Generation,” The ASME Journal of Computer Science and Information in Engineering, Vol. 10, No. 3, September 2010, 031007-1 — 031007-10.
Seung Ki Moon** and Daniel A. McAdams, “A Platform-based Strategic Design Approach for Universal Products,” The International Journal of Mass Customization, Vol. 3, No. 3, 2010, pp. 227-246.
Rahul A. Bidkar* and Daniel A. McAdams, “Methods for Automated Manufacturability Analysis of Injection Molded and Die-Cast Parts,” Research in Engineering Design, Vol. 21, No. 1, January 2010, pp. 1-24.
Tolga Kurtoglu, Matthew I. Campbell, Cari R. Bryant**, Robert B. Stone, and Daniel A. McAdams, “A Component Taxonomy as a Framework for Computational Design Synthesis,” The ASME Journal of Computers and Information Science in Engineering, Vol. 9, No. 1, March 2009, 011007-1 — 011007–11.
Robert L. Nagel*, Prem A. Midha*, Andrea Tinsley*, Daniel A. McAdams, Robert B. Stone, and Li Shu, “Exploring the use of Functional Models in Biomimetic Conceptual Design,” The ASME Journal of Mechanical Design, Vol. 130, No. 12, December 2008, pp. 121102-1 – 121102-13.
Robert L. Nagel*, Jayson P. Vucovich, Robert B. Stone, Daniel A. McAdams, “A Signal Grammar to Guide Functional Modeling of Electromechanical Products,” The ASME Journal of Mechanical Design, Vol. 130, No. 5, May 2008, 051101-1 — 051101-1.
Daniel A. McAdams, David Comella*, and Irem Y. Tumer, “Exploring Effective Methods for Simulating Damaged Structures with Geometric Variation: Toward Intelligent Failure Detection,” The ASME Journal of Applied Mechanics, Vol. 74, No. 2, March 2007, pp. 191-202.
Michael Van Wie, Cari Bryant*, Daniel A. McAdams, and Robert B. Stone, “A Model of Function-Based Representations,” Artificial Intelligence for Engineering Design, Analysis and Manufacturing, Vol. 19, No. 2, 2005, pp. 89-111.
Daniel A. McAdams and Irem Y. Tumer, “Toward Intelligent Fault Detection in Turbine Blades: Variational Vibration Models of Damaged Pinned-Pinned Beams,” The ASME Journal of Vibrations and Acoustics, Vol. 127, No. 5, 2005, pp. 467-474.
Rajesh Radhakrishnan*, and Daniel A. McAdams, “A Methodology for Model Selection in Engineering Design,” The ASME Journal of Mechanical Design, Vol. 127, No. 3, May 2005, pp. 378-387.
Baliji Chandrasekaran*, Robert B. Stone, and Daniel A. McAdams, “Developing Design Templates for Product Platform Focused Design,” Journal of Engineering Design, Vol. 15, No. 3, 2004, pp. 209-228.
Robert B. Stone, Daniel A. McAdams, and Varghese J. Kayyalethekkel*, “A Product Architecture-Based Conceptual DFA Technique,” Design Studies, Vol. 25, No. 3, May 2004, pp. 301-325.
Daniel A. McAdams, “Identification and Codification of Principles for Functional Tolerance Design,” Journal of Engineering Design, Vol. 14, No. 3, 2003, pp. 355-375.
Julie Hirtz*, Robert B. Stone, Daniel A. McAdams, Simon Szykman, and Kristin L. Wood, “A Functional Basis for Engineering Design: Reconciling and Evolving Previous Efforts,” Research in Engineering Design, Vol. 13, No. 2, 2002, pp. 65-82.
Daniel A. McAdams and Kristin L. Wood, “A Quantitative Similarity Metric for Design by Analogy,” The ASME Journal of Mechanical Design, Vol. 124, No. 2, June, 2002, pp. 173-182.
Daniel A. McAdams and Kristin L. Wood, “Tuning Parameter Tolerance Design: Foundations, Methods, and Measures,” Research in Engineering Design, Vol. 12, No. 3, 2000, pp. 152-162.
Daniel A. McAdams, Robert B. Stone, and Kristin L. Wood, “Functional Interdependence and Product Similarity Based on Customer Needs,” Research in Engineering Design, Vol. 11, No. 1, 1999, pp. 1-19.
R. S. Srinivasan, Kristin L. Wood, and Daniel A. McAdams, “Functional Tolerancing: A Design for Manufacturing Methodology,” Research in Engineering Design, Vol. 8 No. 2, 1996, pp. 99-115.
2.REVIEWED CONFERENCE PUBLICATIONS
Elissa Morris* and Daniel A. McAdams, “Bioinspired Origami: Case Studies Using a Keyword Search Algorithm,” submitted to Proceedings of the ASME 2020 International Design Engineering Technical Conferences & Computers and Information in Engineering
Conference, St. Louis, MO, IDETC2020-22228.
Devesh Bhasin* and Daniel A. McAdams, “Fostering Function-Sharing Using Bioinspired Product Architecture,” Proceedings of the ASME 2020 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, St. Louis, MO.
Devesh Bhasin* and Daniel A. McAdams, “Current State of the Art: Problem-Driven MultiFunctional Biomimetic Designs,” Proceedings of the ASME 2019 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, Anaheim, CA, IDETC2019-97455.
Guanglu Zhang*, Douglas Allaire, Daniel A. McAdams, Venkatesh Shankar, “Generating Technology Evolution Prediction Intervals with Bootstrap Method”, Proceedings of the ASME 2018 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, Quebec City, Quebec, Canada, IDETC2018-85259
Shraddha Sangelkar* and Daniel A. McAdams, “Automated Graph Grammar Generation for Engineering Design with Frequent Pattern Mining,” 2017 ASME IDETC/CIE Annual Conference, Cleveland, Ohio, DETC2017-67520.
Guanglu Zhang*, Daniel A. McAdams, Milad Mohammadi Darani, Venkatesh Shankar, “Product Performance Evolution Prediction by Lotka-Volterra Equations,” Proceedings of the ASME 2017 International Design Engineering Technical Conferences & Computers and Information in Engineering, Cleveland, Ohio, DETC2017-67369 [received best paper award for the Design Theory and Methodology Conference].
Elissa Morris* and Daniel A. McAdams, “Integration and evaluation of peer grading in a graduate-level engineering design course,” 2017 ASEE Annual Conference, Columbus, Ohio, Paper ID 19993.
Elissa Morris* and Daniel A. McAdams, “Development of a Keyword Search Tool for Bioinspired Design of Foldable Engineering Applications,” Proceedings of the ASME 2017 International Design Engineering Technical Conferences & Computers and Information in Engineering, Cleveland, Ohio, DETC2017-67958.
Joanna Tsenn*, Julie Linsey, Daniel McAdams, “Bioinspired Materials Design: An Assessment of Methods to Improve a Text Mining Algorithm for Identifying Biological Material Structural Design Principles”, Proceedings of the ASME 2016 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, Charlotte, NC, number IDETC2016-59144
Elissa Morris*, Daniel McAdams, Richard Malak, “The State-of-the-Art of Origami-Inspired Products: A Review”, Proceedings of the ASME 2016 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, Charlotte, NC, number IDETC2016-59629.
Fabien Durand, Michael E. Helms, Joanna Tsenn*, Erin McTigue, Daniel A. McAdams and Julie S. Linsey, “Teaching Students to Innovate: Evaluating Methods for Bioinspired Design and Their Impact on Design Self Efficacy,” Proceedings of the ASME 2015 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, Boston MA, number DETC2015-47716.
Fabien Durand, Michael E. Helms, Joanna Tsenn*, Daniel A. McAdams, Julie S. Linsey, “In Search of Effective Design Problems for Design Research,” Proceedings of the ASME 2015 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, Boston MA, number DETC2015-47701.
Elissa Morris* and Daniel A. McAdams, “A Review of Practical Design Integration Methods for Existing Engineering Curriculum,” 2015 ASEE Annual Conference, Seattle Washington, Paper ID 11454
J.W. Kim, Daniel A. McAdams, and Julie S. Linsey, “Helping Students to Find Biological Inspiration: Impact of Valuableness and Presentation Format,” ASEE/IEEE Frontiers in Education, Madrid, Spain, 22-25 Oct. 2014.
Wei Li* and Daniel A. McAdams, “Designing Optimal Origami Structures By Computational Evolutionary Embryogeny,” Proceedings of the ASME 2014 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, Buffalo, NY, number DETC2014-34377.
Joanna Tsenn*, Daniel A. McAdams, and Julie S. Linsey, “Development of a Search Tool to Identify Structural Design Principles for Bioinspired Materials Design,” Proceedings of the ASME 2014 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, Buffalo, NY, number DETC2014- 34291.
Joanna Tsenn*, Daniel A. McAdams and, Julie S. Linsey, “A Comparison of Mechanical Engineering and Biology Students’ Ideation and Bioinspired Design Abilities”, Design Computing and Cognition ’14, London, England, Gero, J.S. (ed).
Wei Li* and Daniel A. McAdams, “A Novel Pixelated Multicellular Representation for Origami Structures that Innovates Computational Design and Control,” Proceedings of the ASME 2013 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, Portland, Oregon, number DETC2013-13231.
Shraddha Sangelkar* and Daniel A. McAdams, “An Exploratory Study on the Effectiveness of an Inclusive Design Tool with a Metric to Evaluate Inclusivity of Conceptual Designs,” Proceedings of the ASME 2013 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, Portland, Oregon, number DETC2013-13164.
Joanna Tsenn*, Julie S. Linsey, and Daniel A. McAdams, “A Comparison of Design Self-Efficacy of Mechanical Engineering for Freshmen, Sophomores, and Seniors,” The 2013 ASEE Annual Conference and Exposition, Atlanta, Georgia.
Michael W. Glier*, Daniel A. McAdams, and Julie S. Linsey, “An Experimental Investigation of Analogy Formation using the Engineering-to-Biology Thesaurus,” Proceedings of the ASME 2013 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, Portland, Oregon, number DETC2013-13060.
Michael W. Glier*, Joanna Tsenn*, Julie S. Linsey, Daniel A. McAdams, “Evaluating the Directed Method for Bioinspired Design,” Proceedings of the ASME 2012 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, Chicago, Illinois, number DETC2012-71511.
Shraddha Sangelkar*, and Daniel A. McAdams, “Creating Actionfunction Diagrams for User Centric Design,” Proceedings of the ASEE 2012 Annual Conference and Exposition, San Antonio, Texas, 13 pages.
Michael W. Glier*, Joanna Tsenn* Daniel A. McAdams, and Julie S. Linsey, “Evaluating Methods for Bioinspired Concept Generation”, 2012, Design Computing and Cognition ’12, College Station, TX, Gero, J.S.(ed), 20 pages.
Jonathan Arendt*, Richard Malak, and Daniel A. McAdams, “Design with Uncertain Technology Evolution,” SAE 2012 World Congress & Exhibition, Detroit Michigan, April 2012, no. 121DM-0008.Michael W. Glier*, Joanna Tsenn*, Julie S. Linsey, Daniel A. McAdams, “Methods for Supporting Bioinspired Design,” Proceedings of the ASME 2011 International Mechanical Engineering Congress and Exposition, Denver, Colorado, number IMECE2011-63247, pp. 737-744.
hraddha Sangelkar* and Daniel A. McAdams, “Formalizing User Activity – Product Function Association Based Design Rules,” Proceedings of the ASME 2011 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, Washington, DC, number DETC2011-47962, pp. 539-556.
Michael W. Glier*, Daniel A. McAdams and Julie S. Linsey, “Concepts in Biomimetic Design: Methods and Tools to Incorporate into a Biomimetic Design Course,” Proceedings of the ASME 2011 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, Washington, DC, number DETC2011-48571, pp. 655-660.
Matthew Louis Turner Davis*, Daniel A. McAdams, and Anosh Porus Wadia*, “Better Resource Usage through Biomimetic Symbiotic Principles for Host and Derivative Product Synthesis,” Artificial Intelligence and Sustainable Design — Papers from the AAAI 2011 Spring Symposium (SS-11-02), Stanford, California, pp. 26-33.
Jacquelyn K. S. Nagel*, Robert B. Stone, and Daniel A. McAdams, “An Engineering-to-Biology Thesaurus for Engineering Design,” Proceedings of theASME 2010 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, Montreal, Quebec, Canada, number DETC2010-28233, pp. 117-128.
Shraddha Sangelkar* and Daniel A. McAdams, “Adapting ADA Architectural Design Knowledge to Product Design: Groundwork for a Function Based Approach,” Proceedings of the ASME 2010 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, Montreal, Quebec, Canada, number DETC2010-28535, pp. 185-200.
Seung Ki Moon**, and Daniel A. McAdams, “Universal Product Family Design Valuation in an Uncertain Market Environment,” Proceedings of the ASME 2010 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, Montreal, Quebec, Canada, number DETC2010-28682, pp. 891-900.
Anosh P. Wadia*, and Daniel A. McAdams, “Developing Biomimetic Guidelines for the Highly Optimized and Robust Design of Complex Products or Their Components,” Proceedings of the ASME 2010 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, Montreal, Quebec, Canada, number DETC2010-28708, pp. 307-321.
Ryan S. Hutcheson*, and Daniel A. McAdams, “Conceptual Design of a Formula Hybrid Powertrain System Utilizing Functionality-Based Modeling Tools,” Proceedings of the ASME 2010 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, Montreal, Quebec, Canada, number DETC2010-28836, pp. 419-429.
Daniel A. McAdams and Julie S. Linsey, “dDesign Education: A Globally Distributed Capstone Engineering Design Experience,” Capstone Design Conference, June 7-9, 2010, Boulder Colorado.
Jacquelyn K. S. Nagel*, Robert B. Stone, and Daniel A. McAdams, “Exploring the Use of Category and Scale to Scope a Biological Functional Model,” Proceedings of the ASME 2010 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, Montreal, Quebec, Canada, number DETC2010-28873, pp. 139-150.
Robert L. Nagel*, Kenneth L. Perry*, Robert B. Stone and Daniel A. McAdams, “FunctionCAD: A Functional Modeling Application Based on the Function Design Framework,” Proceedings of the 2009 ASME Design Engineering Technical Conferences & Computers and Information in Engineering, San Diego, California, number DETC2009-87010, pp. 591-600.
Seung Ki Moon** and Daniel A. McAdams, “A Design Method for Developing a Universal Product Family in a Dynamic Market Environment,” Proceedings of the 2009 ASME Design Engineering Technical Conferences & Computers and Information in Engineering, San Diego, California, number DETC2009-86784, pp. 941-950.
Vincent Kostovich*, Daniel A. McAdams, and Seung Ki Moon*, “Representing User Activity and Product Function for Universal Design,” Proceedings of the 2009 ASME Design Engineering Technical Conferences & Computers and Information in Engineering, San Diego, California, number DETC2009-87507, pp. 83-100.
Ryan S. Hutcheson*, and Daniel A. McAdams, “A Hybrid Sensitivity Analysis for Use in Early Design,” Proceedings of the 2009 ASME Design Engineering Technical Conferences & Computers and Information in Engineering, San Diego, California, number DETC2009-86784, pp. 175-187.
Seung Ki Moon* and Daniel A. McAdams, “Universal Product Platform and Family Design for Uncertain Markets,” Proceedings of the International Conference on Engineering Design ICED 09, Stanford, California, August 24-27, 2009, no. 228, pp. 59-70.
Jacquelyn K Stroble*, Robert B. Stone, and Daniel A. McAdams, “Conceptualization of Biomimetic Sensors Through Functional Representation of Natural Sensing Solutions,” Proceedings of the International Conference on Engineering Design ICED 09, Stanford, California, August 24-27, 2009, no. 147, pp. 53-64.
Robert L. Nagel*, James L. Greer, Robert B. Stone, and Daniel A. McAdams, “Investigation of System Sensitivity to Propagated Configuration Faults,” Proceedings of the International Conference on Engineering Design ICED 09, Stanford, California, August 24-27, 2009, no. 239, pp. 239-250.
Robert L. Nagel*, James L. Greer, Robert B. Stone, and Daniel A. McAdams, “Fault Propagation and Sensitivity Analysis to Support Counterterrorism Activities,” Proc. 19th Annual INCOSE International Symposium, Singapore, 2009, Paper No. 156.
Jacquelyn K. Stroble*, Robert B. Stone, Daniel A. McAdams, Matthew Goeke and Steve E. Watkins, “Automated Retrieval of Non-Engineering Domain Solutions to Engineering Problems,” Proceedings of the CIRP DESIGN ’09 International Conference, Cranfield University, UK, 2009, pp. 78-85.
Jacquelyn K. Stroble*, Robert B. Stone, Daniel A. McAdams, and Steve E. Watkins, “An Engineering-to-Biology Thesaurus to Promote Better Collaboration, Creativity and Discovery,” Proceedings of the CIRP DESIGN ’09 International Conference, Cranfield University, UK, 2009, pp. 355-362.
Robert L. Nagel*, Kenneth Perry*, Robert B. Stone, and Daniel A. McAdams, “Development of a Vision System for an Intelligent Ground Vehicle,” Proceedings of Intelligent Robots and Computer Vision XXVI: Algorithms and Techniques, San Jose, CA, 2008, Paper Number 7252-24, pp. 72520H-1 — 72520H-10.
Ryan S. Hutcheson*, Daniel A. McAdams, Robert B. Stone and Irem Y. Tumer, “Effect of Model Element Fidelity Within a Complex Function-Based Behavioral Model,” Proceedings of the 2008 ASME Design Engineering Technical Conferences & Computers and Information in Engineering, New York, New York, number DETC2008-49355, pp. 957-967.
Robert L. Nagel*, Robert B. Stone, Ryan S. Hutcheson*, Daniel A. McAdams, and Joseph A. Donndelinger, “Function Design Framework (FDF): Integrated Process and Function Modeling for Complex Systems,” Proceedings of the 2008 ASME Design Engineering Technical Conferences & Computers and Information in Engineering, New York, New York, number DETC2008-49369, pp. 273-286.
Hyunmin Cheong, L. H. Shu, Robert B. Stone, and Daniel A. McAdams, “Translating Terms of the Functional Basis into Biologically Meaningful Keywords,” Proceedings of the 2008 ASME Design Engineering Technical Conferences & Computers and Information in Engineering, New York, New York, number DETC2008-49363, pp. 137-148.
Cari R. Bryant Arnold*, Robert B. Stone, and Daniel A. McAdams, “MEMIC: An Interactive Morphological Matrix Tool for Automated Concept Generation,” Proceedings of the 2008 Industrial Engineering and Research Conference, Vancouver, Canada, May 17-27, 2008, 6 pages.
Jacquelyn K. Stroble*, Steve E. Watkins, Robert B. Stone, Daniel A. McAdams, and Li H. Shu, “Modeling the Cellular Level of Natural Sensing with the Functional Basis for the Design of Biomimetic Sensor Technology,” 2008 IEEE Region 5 Technical, Professional, and Student Conference, Kansas City, Missouri, April 17 – 20, 2008, pp. 1-6.
Ryan S. Hutcheson*, Daniel A. McAdams, Robert B. Stone, and Irem Y. Tumer, “Function-based Systems Engineering (FuSE),” Proceedings of the International Conference on Engineering Design ICED 07, Paris, France, August 28-31, 2007, no. DS42_P_470, 12 pages.
Robert L. Nagel*, Matt R. Bohm, Robert B. Stone, and Daniel A. McAdams, “A Representation of Carrier Flows for Functional Design,” Proceedings of the International Conference on Engineering Design ICED 07, Paris, France, August 28-31, 2007, no. DS42_P_400, 9 pages.
Robert L. Nagel*, Jayson P. Vucovich, Robert B. Stone, and Daniel A. McAdams, “Signal Flow Grammars from the Functional Basis,” Proceedings of the International Conference on Engineering Design ICED 07, Paris, France, August 28-31, 2007, no. DS42_P_401, 10 pages.
Cari R. Bryant*, Robert B. Stone, Daniel A. McAdams, Tolga Kurtoglu, Matthew I. Campbell, and James L. Greer, “A Function-Based Component Ontology for Systems Design,” Proceedings of the International Conference on Engineering Design ICED 07, Paris, France, August 28-31, 2007, no. DS42_P_401, 10 pages.
Dingmar van Eck, Daniel A. McAdams, and Pieter E. Vermaas, “Functional Decomposition in Engineering: a Survey,” Proceedings of the 2007 ASME Design Engineering Technical Conferences & Computers and Information in Engineering Conference, Las Vegas, Nevada, number DETC2007-34232, pp. 227-236.
Ryan S. Hutcheson*, Daniel A. McAdams, Robert B. Stone, Irem Y. Tumer, “Function-Based Behavioral Modeling,” Proceedings of the 2007 ASME Design Engineering Technical Conferences & Computers and Information in Engineering Conference, Las Vegas, Nevada, number DETC2007-35337, pp. 547-558.
Andrea Tinsley*, Prem A. Midha*, Robert L. Nagel*, Daniel A. McAdams, Robert B. Stone, and Li Shu, “Exploring the use of Functional Models as a Foundation for Biomimetic Conceptual Design,” Proceedings of the 2007 ASME Design Engineering Technical Conferences & Computers and Information in Engineering Conference, Las Vegas, Nevada, number DETC2007-35604, pp. 79-92.
V. Vakili, I. Chiu, L.H. Shu, Daniel A. McAdams, and Robert B. Stone, “Including Functional Models of Biological Phenomena as Design Stimuli,” Proceedings of the 2007 ASME Design Engineering Technical Conferences & Computers and Information in Engineering Conference, Las Vegas, Nevada, number DETC2007-35776, pp. 103-113.L. H.
Shu, Robert B. Stone, Daniel A. McAdams, and James L. Greer, “Integrating Function-Based and Biomimetic Design for Automatic Concept Generation,” Proceedings of the International Conference on Engineering Design ICED 07, Paris, France, August 28-31, 2007, no. DS42_P_518, 10 pages.
Robert L. Nagel*, Robert B. Stone and Daniel A. McAdams, “A Theory for the Development of Conceptual Functional Models for Automation of Manual Processes,” Proceedings of the 2007 ASME Design Engineering Technical Conferences & Computers and Information in Engineering Conference, Las Vegas, Nevada, number DETC2007-35620, pp. 263-275.
Cari Bryant*, Robert B. Stone, Daniel A. McAdams, Tolga Kurtoglu, and Matthew I. Campbell, “A Validation Study of an Automated Concept Generator Design Tool,” Proceedings of the 2006 ASME Design Engineering Technical Conferences & Computers and Information in Engineering Conference, Philadelphia, Pennsylvania, number DETC2006-99489, pp. 283-294.
Robert L. Nagel*, Robert B. Stone, and Daniel A. McAdams, “A Process Modeling Methodology for Automation of Manual and Time Dependent Processes,” Proceedings of the 2006 ASME Design Engineering Technical Conferences & Computers and Information in Engineering Conference, Philadelphia, Pennsylvania, number DETC2006-99437, pp. 771-779.
Ryan S. Hutcheson*, Daniel A. McAdams, Robert B. Stone, and Irem Y. Tumer, “A Function-based Methodology for Analyzing Critical Events,” Proceedings of the 2006 ASME Design Engineering Technical Conferences & Computers and Information in Engineering Conference, Philadelphia, Pennsylvania, number DETC2006-99535, pp. 1193-1204.
Vivek Attaluri*, Daniel A. McAdams, Robert B. Stone, and Andrea De Crescenzo, “Visual Representations as an Aid to Concept Generation,” Proceedings of the 2006 ASME Design Engineering Technical Conferences & Computers and Information in Engineering Conference, Philadelphia, Pennsylvania, number DETC2006-99572, pp. 1277-1288.
Cari Bryant*, Eric Pieper, Brandon Walther, Robert B. Stone, Daniel A. McAdams, Tolga Kurtoglu, and Matthew I. Campbell, “Software Evaluation of an Automated Concept Generator Design Tool,” Proceedings of the 2006 American Society for Engineering Education Annual Conference & Exhibition, Chicago, Illinois, Paper 2005-1758.
Brian A. Mitchell*, Daniel A. McAdams, Robert B. Stone, and Irem Y. Tumer “Computational Methods to Predict and Avoid Design Failure,” Proceedings of the 2005 ASME International Mechanical Engineering Conference and Exposition, Orlando, Florida, November 5-11, 2005, number IMECE2005-79907, pp. 721-732.
Cari R. Bryant*, Daniel A. McAdams, Robert B. Stone, Tolga Kurtoglu, and Matthew I. Campbell, “A Computational Technique for Concept Generation,” Proceedings of the 2005 International Design Theory and Methodology Conference, Long Beach, California, number DETC2005-85323, pp. 267-276.
Venkat Rajagopalan*, Cari R. Bryant*, Jeremy Johnson*, Robert B. Stone, Daniel A. McAdams, Tolga Kurtoglu, and Matthew I. Campbell, “Creation of Assembly Models to Support Automated Concept Generation,” Proceedings of the 2005 International Design Theory and Methodology Conference, Long Beach, California, number DETC2005-85302, pp. 259-266.
Ryan S. Hutcheson*, Joseph A. Donndelinger, Daniel A. McAdams, and Robert B. Stone, “FUNdesign – a Function-based Method for Addressing Uncertainty During the Design of Engineered Systems,” Proceedings of the 2005 International Design Theory and Methodology Conference, Long Beach, California, number DETC2005-85293, pp. 161-170.
Tolga Kurtoglu, Matthew I. Campbell, Joah Gonzales, Cari R. Bryant*, Robert B. Stone, and Daniel A. McAdams, “Capturing Empirically Derived Design Knowledge for Creating Conceptual Design Configurations,” Proceedings of the 2005 International Design Theory and Methodology Conference, Long Beach, California, number DETC2005-84405, pp. 249-257.
Cari R. Bryant*, Daniel A. McAdams, and Robert B. Stone, “Concept Generation from the Functional Basis of Design,” International Conference on Engineering Design ICED 05, Melbourne, Australia, August 15-18, 2005, no. DS35_222.1, 13 pages.
Tolga Kurtoglu, Matthew I. Campbell, Cari R. Bryant*, Robert B. Stone, Daniel A. McAdams, “Deriving a Component Basis for Computational Functional Synthesis,” International Conference on Engineering Design ICED 05, Melbourne, Australia, August 15-18, 2005, no. DS35_123.1, 15 pages.
Ryan S. Hutcheson*, Daniel A. McAdams, Joseph A. Donndelinger, and Robert B. Stone, “Applying Functional Modeling as a Unifying Basis for Design for Six Sigma Execution,” Proceedings of IMECE 2004, Anaheim, California, number IMECE2004-62312, pp. 979-990.
Cari R. Bryant*, Karthik L. Sivaramakrishnan*, Michael Van Wie, Robert B. Stone, and Daniel A. McAdams, “A Modular Design Approach to Support Sustainable Design,” in Proceedings of the 2004 Design for Manufacturing Conference, Salt Lake City, Utah, number DETC2004-57775, pp. 909-918.
Ravindra M. Kurtadikar*, Robert B. Stone, Mike Van Wie, and Daniel A. McAdams, “A Customer Needs Motivated Conceptual Design Methodology for Product Portfolios,” in Proceedings of the 2004 International Design Theory and Methodology Conference, Salt Lake City, Utah, number DETC2004-57289, pp. 153-166.
Daniel A. McAdams and Clive Dym, “Modeling and Information in the Design Process,” in Proceedings of the 2004 International Design Theory and Methodology Conference, Salt Lake City, Utah, number DETC2004-57101, pp. 21-30.
Rahul Bidkar* and Daniel A. McAdams, “Feature Recognition for Injection-Molded and Die-Cast Parts,” in Proceedings of the 2004 Design for Manufacturing Conference, Salt Lake City, Utah, number DETC2004-57754, pp. 693-702.
Daniel A. McAdams, David Comella*, and Irem Y. Tumer, “Developing Variational Vibration Models of Damaged Beams: Toward Intelligent Failure Detection,” Proceedings of 2003 International Mechanical Engineering Congress and Exposition, November 15-21, 2003, Washington, D.C, number IMECE2003-42540, pp. 521-534.
Ravi Yekula*, Daniel A. McAdams, and Robert B. Stone, “Functional and Mathematical Equivalence of Mechanisms: A Novel Approach to Integrating Synthesis and Design Analysis,” Proceedings of the 2003 International Design Theory and Methodology Conference, Chicago, Illinois, number DETC2003/DTM-48663, pp. 675-685.
Rahul Bidkar*, and Daniel A. McAdams, “Automated Manufacturability Analysis for Injection-Molded/Die-Cast Parts,” Proceedings of the 2003 Design for Manufacturing Conference, Chicago, Illinois, number DETC2003/DFM-48154, pp. 205-226.
Daniel A. McAdams and Irem Y. Tumer, “Toward Failure Modeling in Complex Dynamic Systems: Impact of Design and Manufacturing Variations,” Proceeding of the 2002 Design for Manufacturing Conference, Montreal, Quebec, Canada, number DETC2002/DFM-34161, pp. 71-81.
Zeke Strawbridge*, Daniel A. McAdams, and Robert B. Stone, “A Computational Approach to Conceptual Design,” Proceeding of the 2002 International Design Theory and Methodology Conference, Montreal, Quebec, Canada, number DETC2002/DTM-34001, pp. 15-25.
Rajesh Radhakrishnan*, and Daniel A. McAdams, “A Framework for Sufficiency Estimation of Engineering Design Models,” Proceedings of the 2001 ASME Design Theory and Methodology Conference, Pittsburgh, Pennsylvania, number 2001-DETC/DTM-21699, 11 pages.
Julie Hirtz*, Robert B. Stone, Daniel A. McAdams, Simon Szykman, and Kristin L. Wood, “Evolving a Functional Basis for Engineering Design,” Proceedings of the 2001 ASME Design Theory and Methodology Conference, Pittsburgh, Pennsylvania, September 2001, number 2001-DETC/DTM-21688, 11 pages.
Daniel A. McAdams and Kristin L. Wood, “Quantitative Measures for Design by Analogy,” Proceedings of the 2000 ASME Design Theory and Methodology Conference Baltimore, Maryland, September 2000, number DETC2000/DTM-14562, 11 pages.
Daniel A. McAdams and Kristin L. Wood, “Theoretical Foundations for Tuning Parameter Tolerance Design,” Proceedings of the 2000 ASME Design for Manufacturing Conference, Maryland, September 2000, number DETC2000/DFM-14003, Baltimore, 11 pages.
Daniel A. McAdams and Kristin L. Wood, “Methods and Principles for Concurrent Functional Tolerance Design,” Proceedings of the 1999 ASME DesignFor Manufacturing Conference, Las Vegas, Nevada, 1999, number DETC99/DFM-8949, 15 pages.
Daniel A. McAdams, Robert B. Stone, and Kristin L. Wood, “Understanding Product Similarity Using Customer Needs,” Proceedings of the 1998 ASME Design Theory and Methodology Conference, Atlanta, Georgia, 1998, number 98-DETC/DTM-5660, 15 pages.
Paul B. Koeneman and Daniel A. McAdams, “Load Leveling Device Selection for Hybrid Electric Vehicles,” Electric and Hybrid Vehicle Energy Storage and Utilization SAE Special Publication SP-1331, pp. 77-83, Detroit, February 23-26, 1998.
Aaron D. Little, Kristin L. Wood and Daniel A. McAdams, “Functional Analysis: A Fundamental Empirical Study for Reverse Engineering, Benchmarking and Redesign,” Proceedings of the ASME Design Theory and Methodology Conference, Sacramento, California, September 1997, number DETC97/DTM-3879, 13 pages.
Daniel A. McAdams and Kristin L. Wood, “The Effect of a Fractal Profile Tolerance on the Dynamic Performance of Cams,” Proceedings of the ASME Design for Manufacturing Conference, Irvine, California, August 1996, number 96-DETC/DFM-1276, 12 pages.
1. R. S. Srinivasan, Kristin L. Wood and Daniel A. McAdams, “Functional Tolerancing: A Design For Manufacturing Methodology,” Proceedings of the ASME Design Engineering Technical Conference, Vol. 2, 1995.
3.BOOKS
Ashak Goel, Daniel A. McAdams, and Robert Stone (editors), Biologically Inspired Design: Computational Methods and Tools, 2013, Springer.
4.BOOK CHAPTERS AND SIMILAR
Joanna Tsenn*, Daniel A. McAdams, Julie S. Linsey, “A Comparison of Mechanical Engineering and Biology Students’ Ideation and Bioinspired Design Abilities,” in Design Computing Cognition ’14, John S. Gero and Sean Hanna (ed), Springer, 2015.
Nagel, J.K.S.*, Stone, R.B., and McAdams, D.A., Function-based Biologically-Inspired Design, in Biologically Inspired Design: Computational Methods and Tools, A. Goel, D.A. McAdams, and R.B. Stone, Editors. 2013, Springer.
Jacquelyn K. Stroble*, Robert L. Nagel*, Robert B. Stone, and Daniel A. McAdams, “Function-Based Biology Inspired Concept Generation” in Biomimetics Learning from Nature, ISBN 978-953-307-025-4, Amitava Mukherjee (ed), Intech, 2010.
5.ABSTRACT REVIEWED CONFERENCE PROCCEEDINGS, EDITORIALS, AND OTHER PUBLICATIONS
Daniel A. McAdams, “Discussion of “A Review of Thickness-Accommodation Techniques in Origami-Inspired Engineering” (Lang, Robert J., Crampton, Erica B., Tolman, Kyler A., Magleby, Spencer P., Howell, Larry L., 2017, ASME Appl. Mech. Rev., ….)”, ASME Applied Mechanics Reviews, AMR-17-1087.
Ashok K. Goel, Daniel A. McAdams, Robert B. Stone, “Special Issue on Biologically Inspired Design” [editorial], The ASME Journal of Mechanical Design, Vol. 136, No. 11, pp. 110301-1 0 110301-3.
Ashok K. Goel, Daniel A. McAdams, Robert B. Stone, “Biologically Inspired Design” [editorial], The ASME Journal of Mechanical Design, Vol. 135, No. 7, July 2013.
Daniel A. McAdams and Robert Stone, “Thesaurus and Guideline Generation for Biomimetic Design,” Proceedings of the 2011 NSF Civil, Mechanical, and Manufacturing Innovation Conference, Atlanta, Georgia, January 2011.
Daniel A. McAdams, Annual Report for “A Biomimetic Concept Generator for Engineering Design,” Grant number 0800772, National Science Foundation, April 2010.
Daniel A. McAdams and Robert Stone, “Creating the Foundations of Function Based Biomimetic Concept Generation,” Proceedings of the 2009 NSF Civil, Mechanical, and Manufacturing Innovation Conference, Honolulu, Hawaii, June 2009.
Daniel A. McAdams, Annual Report for “A Biomimetic Concept Generator for Engineering Design,” Grant number 0800772, National Science Foundation, April 2009.
Daniel A. McAdams, Robert Stone, Li Shu “Function Based Biomimetic Design,” Proceedings of the 2008 NSF Civil, Mechanical, and Manufacturing Innovation Conference, Knoxville, TN, January 2008.
Michael Van Wie, Robert B. Stone, and Daniel A. McAdams, “Sustainable Design Through Product Evolution,” in Proceedings of IMECE 2004, number IMECE2004-60667, Anaheim, CA.
Ryan S. Hutcheson*, Daniel A. McAdams, and Robert B. Stone, “Applying Functional Modeling as a Unifying Basis for Design-For-Six-Sigma Execution,” Technical Report for General Motors Research Contract, December 2003.
Ryan S. Hutcheson*, Matt R. Bohm, Daniel A. McAdams, and Robert B. Stone, “Applying Standardized Functional Modeling Techniques to DFSS and Systems Engineering,” Technical Report for General Motors Research Contract, August 2003.
Matt R. Bohm, Michael E. Stock, Ryan S. Hutcheson*, Daniel A. McAdams, Robert B. Stone, “Opportunities for Application of Formal Functional Modeling Methods in Advanced Vehicle Development,” Technical Report for General Motors Research Contract, May 2003.
Matthew Green, Alan Dutson, Kristin Wood, Robert Stone, and Dan McAdams, “Integrating Service-Oriented Design Projects in the Engineering Curriculum,” Proceedings of the ASEE annual conference and exposition, session 3660, Montreal, Quebec, Canada, June 15-19, 2002.
Cari R. Bryant*, Mark A. Kurfman, Robert B. Stone, and Daniel A. McAdams, “Creating Equation Handbooks to Model Design Performance Parameters,” International Conference on Engineering Design ICED 01, Glasgow, Scotland, August 21-23, 2001.
Ming C. Leu, Frank Liou, Daniel A. McAdams, Venkat Allada, Bahador Ghahramani, Sanjeev Agarwal, Richard C. Hall, “Planning of a Multi-disciplinary Rapid Product Realization Program,” the International Conference on Engineering Education (ICEE2000), Taiwan, August 14-18, 2000.
Robert B. Stone and Daniel A. McAdams, “The Touchy-Feely Side of Engineering Education: Bringing Hands-on Experiences to the Classroom,” 35th ASEE Midwest Section Conference, Omaha, Nebraska, April 5 -7, 2000.
Beaman, D. Bourell, B. Jackson, L. Jepson, D. McAdams, J. Perez, and K. Wood, “Multi- Material Selective Laser Sintering: Empirical Studies and Hardware Development,” Proceedings of the 2000 NSF Design and Manufacturing Grantees Conference, January 2000.
Daniel A. McAdams “Matrix Approach Pinpoints Relationships Between Products,” Advanced Manufacturing Technology Newsletter, Published by John Wiley and Sons, November 1999.
6.UNDERGRADUATE RESEARCH
Kaylee Kaigler, Undergraduate Research, Spring 2017, Topic: Bioinspired Geoengineering.
Cesar Emmanuel Hernandez, Undergraduate Research (NSF REU), Spring 2014, Topic: Developing Bioinspired Search Tools.
Bryan W Haag, Undergraduate Research (NSF REU), Spring 2014, Topic: Developing Bioinspired Search Tools.
Wyatt Smitherman, Undergraduate Research (NSF REU), Fall 2013, Topic: Exploratory Study on Technology Evolution – Ecological Models.
Aeriel Corey, Undergraduate Research (NSF REU), Fall 2013, Topic: Developing Origami Mathematics Learning Materials.
Bradley Custard, Undergraduate Research (NSF REU), Fall 2013, Topic: Developing Bioinspired Search Tools.
Geoffery Garner, Undergraduate Research (NSF REU), Fall 2013, Topic: Developing Bioinspired Search Tools.
Bryan W Haag, Undergraduate Research (NSF REU), Fall 2013, Topic: Developing Bioinspired Search Tools.
Ryan Michael Loofs, Undergraduate Research (NSF REU), Fall 2013, Topic: Developing Bioinspired Search Tools.
Cesar Emmanuel Hernandez, Undergraduate Research (NSF REU), Fall 2013, Topic: Developing Bioinspired Search Tools.
Khristan-Allen Maney, Undergraduate Research (NSF REU), Fall 2013, Topic: Developing Bioinspired Search Tools.
William Tanner Parten, Undergraduate Research (NSF REU), Fall 2013, Topic: Developing Bioinspired Search Tools.
Nicholas Perry, Undergraduate Research (NSF REU), Fall 2013, Topic: Developing Bioinspired Search Tools.
Jesse T O’Connor, Undergraduate Research (NSF REU), Fall 2013, Topic: Developing Bioinspired Search Tools.
Adam Achttien, Undergraduate Research (NSF REU), Fall 2012, Topic: Developing Bioinspired Search Tools.
Jacy Lynn Johnson, Undergraduate Research (NSF REU), Fall 2012, Topic: Exploring the Impact of Resketching on Design Creativity Assessment.
Christian Diaz, Undergraduate Research (NSF REU), Fall 2012, Topic: Exploring the Impact of Resketching on Design Creativity Assessment.
Wesley Jones, Undergraduate Research (NSF REU), Spring 2013, Spring-Fall 2012, Topic: Developing Bioinspired Search Tools.
Keith Anderson, Undergraduate Research (NSF REU), Fall 2012, Topic: Developing Bioinspired Search Tools.
Arial Corey, Undergraduate Research (NSF REU), Spring 2013, Fall 2012, Topic: Developing Disability Simulation Tools.
Wesley Jones, Undergraduate Research (NSF REU), Fall 2011, Topic: Developing a Bioinspired Engineering Design Knowledge Base.
Ethan Landefeld, Undergraduate Research (NSF REU), Fall 2011-Spring 2012, Topic: Developing a Bioinspired Engineering Design Knowledge Base.
Chris Luce, Undergraduate Research (NSF REU), Fall 2011, Topic: Developing a Bioinspired Engineering Design Knowledge Base.
Mark Nash, Undergraduate Research (NSF REU), Fall 2011, Topic: Developing a Bioinspired Engineering Design Knowledge Base.
Michael Riemer, Undergraduate Research (NSF REU), Fall 2011, Topic: Developing a Bioinspired Engineering Design Knowledge Base.
Nosakhare Jason Oyegun, Undergraduate Research (NSF), Fall 2008 – Fall 2010, Topic: Biomimetic Design Categorization.
Emily Jernigan, Undergraduate Research (NSF REU), Fall 2008 – Fall 2010, Topic: Biomimetic Design Categorization.
Phil Graf, Undergraduate Research, Fall 2007, Topic: Evolutionary Modeling of Automotive Subsystems.
Forrest Lindsey, Undergraduate Research (NSF REU), Summer – Fall 2007, Topic: Functional Modeling of Natural Systems.
Kenneth Perry, Undergraduate Research (NSF REU), Summer 2007, Topic: Computational Concept Generation.
Michael Flemming, Undergraduate Research, Spring 2007, Topic: Mechanism Design for Biomimetic Nano-Air Vehicle.
Kenneth Perry, Undergraduate Research (GM), Fall 2006-Spring 2007; Fall 2007, Topic: Software Development for Functional Modeling.
Jason Cook, Undergraduate Research (GM), Fall 2006-Spring 2007, Topic: Software Development for Functional Modeling.
Prem Midha, Undergraduate Research (NSF REU), Fall 2006-Spring 2007, Topic: Biomimetic Functional Modeling.
Ryan Arlitt, Undergraduate Research (NSF REU), Summer 2006, Topic: Functional Model Construction and Repository Building.
Garrett Foster, Undergraduate Research (NSF REU), Summer 2006, Topic: Functional Model Construction and Repository Building.
Wyatt Davenport, Undergraduate Research, Winter 2006, Topic: Survey and Analysis of Nano Air Vehicles.
Eric Pieper, Undergraduate Research (NSF REU), Summer 2005, Topic: Functional Model Construction and Repository Building.
Phillip Mulligan, Undergraduate Research (NSF REU), Summer 2005, Topic: Functional Model Construction and Repository Building.
Jeremy Johnson, Undergraduate Research (NSF REU), Summer 2004, Topic: Building Knowledge for a Computational Concept Generator.
Matt Wolk, Undergraduate Research (NSF REU), Summer 2004 Topic: Building Knowledge for a Computational Concept Generator.
Ben Wright, Undergraduate Research, Winter 2004, Topic: Translation of Design Catalogs.
Alex Rigoni, Undergraduate Research, Winter 2003, Topic: Developing FEA Models of Cracked Structures.
Matthew Markham, Undergraduate Research, Summer 2002, Topic: Design and CNC Programming for Vibrational Test Specimens.
Brandon Wieschhaus, Undergraduate Research, Summer 2002, Topic: Determining the Manufacturing Capability of a Desktop CNC.
Derek Fryar, Undergraduate Research, Topic: Design of a Safety Enclosure for a Miniature CNC machine, Fall 2001.
Bryan Ziegler, Undergraduate Research, Topic: Redesign and Solid Modeling of a Mechanical System for Controlling Laser Guiding Lenses, Fall 2001.
Douglas Bristow, Undergraduate Research, Summer 2000, Topic: A Case Study of Tuning Parameter Design for Precision Performance.